1. The plastic crusher should be placed in a ventilated position to ensure that the working heat of the motor is dissipated and its life is prolonged.
2. The bearings should be regularly filled with lubricating oil to ensure the lubrication between the bearings.
3. Regularly check the tool screws, and after the new plastic crusher is used for 1 hour, use the tool to tighten the screws of the moving knife and the fixed knife to strengthen the fixity between the blade and the knife holder.
4. In order to ensure the sharpness of the cutter incision, the cutter should be checked frequently to ensure its sharpness and reduce unnecessary damage to other parts caused by the blunt lack of the blade.
5. When changing the tool, the gap between the moving knife and the fixed knife: 0.8mm for the crusher above 20hp is preferred, and 0.5mm for the crusher below 20hp is better. the thinner the recyclable, the larger the gap.
6. Before the second start, the remaining debris in the machine room should be removed to reduce the starting resistance. The inertia cover and pulley cover should be opened regularly to remove the ash outlet under the flange, because the plastic crusher room discharges powder into the shaft bearing.
7. The machine should be well grounded.
8. Regularly check whether the belt of the plastic crusher is loose and tighten it in time.
